Fiat 500 ELECTRIC RIDE-ON 701 Installations- Und Bedienungshandbuch Seite 3

STEP 1
Place the front windshield over the
location in the front of the car body,
tightened by two screws with a
screwdriver (not included).
STEP 4
When the battery is installed insert
the red cable terminal into the battery
positive pole.
STEP 7
Insert the rear wheel into the axle
and press the button, insert the ring,
making sure the wheels are comple-
tely fixed.
9025036i_OL.indd 3 9025036i_OL.indd 3
STEP 2
Place the two rear-view mirror over
the hole in the car body, making sure
the rear-view mirror is correctly in
place.
STEP 5
Place the seat into the location in the
car body, then tighten by a screw with
a screwdriver.
STEP 7
Insert the rear wheel into the axle and
press the button, making sure the
wheels are completely fixed.
STEP 3
Place the rear windshield over the lo-
cation in the rear of car body, making
sure the rear windshield is correctly
in place.
STEP 6
Insert the front wheels and gaskets
into the axle in both sides and press
the center button, making sure the
front wheels are completely fixed.
STEP 8+9
8. Connect the wire plug of the
steering wheel into the wire plug of
the car body, then insert the plug into
the hole.
9. Insert the steering wheel into the
axle, making sure it is completely
fixed.
11-08-2020 10:15 11-08-2020 10:15