Zodiac MEDLINE 500 Eignerhandbuch Seite 89

 Choose a free fuse location.
 Connect the power supply of your accessory to the terminal corresponding to this slot using
a 6 mm female tab type terminal lug.
 If you have to add cable for the connection, use cable with a cross-section of at least 1.5 mm²
that complies with "marine" standards (UL1426 or SAE J378 or SAE J1127 or SAE J1128 or
more generally meeting ABYC and/or EC standards),
 Connect the earth cable of your accessory to the ground terminal strip using a Ø5 "ring
terminal" (same comment as for the cable above),
 Insert an ATO type fuse with a max current of 15 A and greater than the load current of your
device.
+
Red wire
-
Red wire
Page 37 / 59
Red wire
Red wire
Direct wiring
Wiring with
switch
E
N
G
L
I
S
H