Zodiac MEDLINE 500 Eignerhandbuch Seite 74

BUOYANCY TUBE – INFLATION SYSTEM
II -4-INFLATION SYSTEM
THE INFLATION PUMP
a. tube end
* An electrical (12 V) high output inflation pump is available as an option (Contact your dealer).
"EASY PUSH" VALVES
To change position
Push
Place all the valves in the inflation position.
Attach the hose connector to the inflation
pump inflation port.
To inflate your boat properly, the inflation
pump should be correctly placed on the
ground.
The boat inflates rapidly if the inflation pump
is used smoothly and without haste.
WARNING
BUOYANCY TUBE - PRESSURE
In inflating position
The membrane is closed,
the plunger is up
Do not use a compressor or compressed air cylinder.
Page 22 / 59
a
In deflating position
The membrane is open,
the plunger is down