2. Pull out the card tray. You can place the nano-SIM
cards on the right and middle card slots, and place a
microSDXC card (optional) on the left card slot, as
shown. Carefully slide the tray back into place.
NOTE:
If two nano-SIM cards are installed, both cards can
connect to the 4G, 3G, or 2G network, and either card
can be used for mobile data.
Charging the Phone
Your phone's battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
6