Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
concerning use of the appliance in a safe way
and if they understand the hazards involved.
Improper use
•
The appliance is only intended for short term
operation. After an operation time of 3 minutes,
let it cool for at least 30 minutes. Do not
overload the appliance.
•
Never use accessories which are not
recommended by the manufacturer. They could
pose a safety risk to the user and might damage
the appliance. Only use original parts and
accessories.
WARNING:
•
Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during
cleaning.
•
The blender is only to be used with the stand
provided.
CAUTION:
•
Ensure that the blender is
switched off before removing it from the stand.
•
Switch off the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
CAUTION:
•
In order to avoid a hazard due
to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
•
Regarding the instructions for cleaning surfaces
in contact with food, please refer to chapter
"After use".
•
Do not pour hot liquid into the appliance as it
can be ejected out of the appliance due to a
sudden steaming.
•
This appliance is not suitable for commercial use.
It is only intended to be used in the household.
•
The use of extension cords, multiple plugs or
power strips is prohibited due to the associated
fire hazard.
•
Do not pull the power plug out of the electrical
outlet by the power cord and do not wrap the
power cord around the appliance.
•
Do not leave the appliance unattended during
operation.
WARNING!
•
accordance with these instructions. Do not
attempt to modify the appliance in any way.
Danger of electric
•
shock!
Do not attempt to repair
the appliance yourself. In case
of malfunction, repairs are to be
conducted by qualified personnel only.
•
Always place and operate the appliance on an
even, stable and dry surface able to hold the
weight of the appliance.
•
Never operate the appliance with an empty jug.
•
Do not try to operate the appliance without a
Potential injury from misuse.
Use this appliance solely in
properly attached lid. Do not open the lid before
the blade stops running completely.
•
Do not fill the jugs above the indicated
maximum filling height.
•
Keep hands, hair, clothing and utensils away
from the cutting blades during operation to
avoid injuries and damage of the appliance. A
scraper may only be used when the appliance is
switched off.
Residual risks
•
Connect the mains plug to an easily accessible
socket, in order to quickly disconnect the
appliance from the mains supply in an emergency.
Electrical safety
•
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
Ensure the rated voltage shown on the rating label
corresponds with the voltage of the power supply.
•
Do not operate any appliance with a damaged
power cord or plug, when the appliance
malfunctions or has been damaged in any
manner.
•
Protect the power cord against damages. Do
not let it hang over sharp edges, do not squeeze
or bend it. Keep the power cord away from
hot surfaces and open flames and ensure that
nobody can pull on or trip over it unintentionally.
•
Do not open the housing under any
circumstances. Do not insert fingers or foreign
objects in any opening of the appliance and do
not obstruct the air vents.
•
Protect the appliance against heat. Do not place
close to open flames or heat sources such as
stoves or heating appliances.
3. Operation
Control
element
Function control knob
OFF: Turns the appliance off.
ON: Appliance switches into mode
selection so that an automatic
mode can be selected with the
buttons. The button indicators flash.
P: The appliance operates as long
as the function control knob is kept
in position P (Pulse mode).
MIN - MAX: The appliance operates
in manual mode which allows a
continuous adjustment of speed.
Notes:
• The operating light in the
• The speed cannot be adjusted
- 11 -
Function
knob lights up as long as the
appliance is operating.
with the knob when an
automatic mode is selected.
GB
Werbung
Inhaltsverzeichnis
