Dynamic Label Plus; Setting Drc; Deleting Inactive Stations; Sorting The Stations - TechniSat DIGITRADIO 602 Bedienungsanleitung

By pressing the INFO button several times, different information can be
scrolled through, such as station type, multiplex name, frequency, signal error
rate, data bit rate, station format, date (depending on the active source).

12.9 Dynamic Label Plus

If supported by the programme provider, the Dynamic Label Plus service also allows,
for example, the name of the current programme or the track and artist to be
displayed.

12.10 Setting DRC

The compression rate balances dynamic fluctuations and thereby any volume
variations that occur.
> Press the MENU button and select > [Volume Adjustment], to select the
desired compression rate.
> Select the compression rate:
DRC high
DRC low
DRC off
> Confirm by pressing OK.

12.11 Deleting inactive stations

> Press the MENU button and use  or  to select > [Delete inactive
stations].
> Confirm by pressing OK.
> Using  or , select > [Yes] and confirm by pressing OK.

12.12 Sorting the stations

> Press the MENU button and then  or  to select > [Station order].
> Select a sorting type with  or  and confirm your selection with OK.
You can now choose between: Alphanumeric and provider.
- High compression
- Low compression
- Compression switched off.
DE DE
EN EN
FR FR
NL NL
61