Motion CM-35 Bedienungsanleitung Seite 10

M O TI O N CM - 3 5 E LE CT RON IC C UR TA IN M O T O R
7 Set favourite position (optional)
18
8 Operate the blind
Move the blind to a desired favourite position.
7.1
Activate program mode by shortly pressing the
7.2
program button. The curtain will start stepping and
the favorite position can be set.
Hold the centre button to save this favourite
7.3
position. The blind shortly stops stepping indicating
the favourite position has been saved.
Shortly press the program button to deactivate
7.4
program mode. The blind stops stepping and can
be operated.
Center
Up Remote control: Choose the
Center channel to which the blind
has been paired using the
channel button.
Down
Press the up or down button
Channel
to operate the blind. Press
Selection
the center button to stop the
blind. Use the left and right
button to move the blind in
small steps.
Pull control: Pull once to
move the blind to the end
positions.
M O T I O N C M -3 5 E L EC TR ONI C C U R TA I N MOT OR
9 Move to favourite position
Center
10 Reset favourite position
Move the blind to a desired favourite position.
10.1
Press the program button on the motor to activate
10.2
Center
program mode. The blind starts stepping.
Hold the center button to save this favourite position. The blind shortly stops
10.3
stepping indicating the favourite position has been saved succesfully.
Press the program button on the motor to de-activate
10.4
program mode. The blind stops stepping.
Remote control: Press the center button to
move the blind to the favourite position.
19