Safety Instructions - Megasat HD Stick 620 T2 Bedienungsanleitung

Safety instructions

Please read the manual thoroughly before operating the equipment. In case of incorrect
or improper handling, the warranty becomes void.
Power supply:
Overload:
Liquid:
Ventilation:
Risk of suffocation: Do not let children play with films or other packaging
Cleaning:
Uncover:
Before start please check the correct operation voltage of the
power point. The operating voltage of this device is AC 100-
240 V, 0,5 A / DC 12 V, 1A.
Do not overload a wall outlet, extension cord or adapter, neither
use damaged power cord or touch it with wet hand as this may
result in electric shock.
The device shall not be exposed to dripping or splashing water,
and that no objects filled with liquids, such as base, shall be
placed on the apparatus.
Keep the slots on top of the receiver uncover to allow sufficient
airflow to the unit. Do not expose the receiver to direct light or
do not place it near a heater or in humid conditions. Do no
stack other electronic equipments on top of the receiver.
components, there is a risk of suffocation.
Plug out the receiver from the wall outlet before cleaning. Clean
the receiver by a soft cloth or mild solution of washing-up liquid
(no solvents).
Do not remove the cover, to reduce the risk of electric shock.
Contact qualified and licensed service personnel to repair the
receiver, or contact your dealer.
ENGLISH
03