Herunterladen Inhalt Inhalt Diese Seite drucken

Main Controls; Loading Controls - Milnor MilTouch 48040F7D Bedienerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Main Controls

extractors.
Master power switch (
trol system.
Remove power from the control system.
Energize the control system.
Touchscreen for the MilTouch™ controller — This is a touch-sensitive display screen that
you use for most machine functions.
Door unlock button (
opened. This button is only active when the machine is idle and the water in the machine is below
door level.
This button is also part of the two-hand controls circuitry. When the machine is idle, this button
must be held depressed to perform the tilt functions. This requirement helps ensure that you have
both hands safely on the control panel of the machine and away from moving components.

Loading Controls

load and unload the machine.
Pivot selector switch (
ward or rearward. Set this switch to the left position (
the right position (
Tilt direction switch (
cate the direction of movement of the machine. To tilt the machine, select a direction with the
pivot selector switch, then hold this switch in the desired position while you hold the door un-
lock button (
) depressed.
Jog direction switch (
clockwise or counterclockwise to help you load or unload the machine. The arrows indicate the
direction of rotation.
To rotate the cylinder, hold the jog direction switch in the desired position while you hold the
door unlock button (
Rotate the cylinder clockwise.
Rotate the cylinder counterclockwise.
NOTE: The jog feature is disabled on machines that are equipped with load cells.
Pellerin Milnor Corporation
— The controls listed in this section occur on all MilTouch™ washer-
) — This switch energizes and removes power from the con-
) — This button frees the door latch so the door can be unlatched and
— The controls listed in this section can be used to help the operator
) — This switch determines whether the machine tilts for-
) to enable tilt rearward to load.
) — This switch allows you to tilt the machine. The arrows indi-
) — This switch allows you to rotate the cylinder slowly
) depressed.
) to enable tilt forward to unload; use
Controls
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis