TechniSat TECHNIBOX UHD S Bedienungsanleitung Seite 156

DVR recordings are not
displayed
The device cannot be
operated, or switched on
or off
USB device is not
detected
Devices switches itself off
after a specific time
156
Selected storage medium
is not inserted.
Faulty data stream -->
Device blocked
USB device is formatted in
the incorrect file system
Auto standby function is
switched on
Insert selected storage
medium
Correct the storage
medium setting
Press and hold the On/
Standby button on the
remote control for approx.
5 seconds.
Remove the mains plug
for approx. 5 seconds,
then switch the device
back on
Perform flash reset:
Attention!
In doing so, all personal
settings are deleted and
the device starts with
factory settings
> Unplug the power
adapter from the device.
> Press standby and
the up arrow button on
the device at the same
time and hold them
down.
> While the standby and
up arrow button are
pressed down, reconnect
the mains plug
> Keep the buttons
pressed for approx. 5 secs.
and then release both
buttons. The display
shows the message
"FLA5."
Format USB device
in the FAT32 file system
Check auto standby
setting and, if required,
switch off.