Operation - Lacor DECOR 39135 Gebrauchs- Und Instandhaltungsanleitung

1.- Once the device is installed, press the central part of the cover (1) inwards so that it opens
(Image 1).
2.- Open the lid and lock it so that it does not open.
Turn the lid support (11) upwards until the fixed support of the lid (12) is inside it. Carefully
release the lid and make sure it is held on its own just on the supports (Image 2).
3.- Press down lightly the adhesive paper support (10) and lower it until it comes into contact with
the electrical box (4) of the appliance (Picture 3).
4.- Remove an adhesive paper (9) from the wrapping, remove the protective film that protects the
adhesive surface and insert it through the slot (5) that the paper support has (Image 4).
5.- When the paper has been fully inserted and does not protrude from the support, raise the support
gently until you hear a click at the time of contact with the base (Image 5).
6.- Place the two bulbs (2) in the bulb holder (3). Insert the two terminals of each of the bulbs into
the openings of the bracket and turn the bulbs 90 degrees (Image 6).
7.- Close the lid by pressing it slightly towards the base until it is blocked.
8.- Plug the appliance into an electrical outlet. The mosquito killer will start automatically.
During operation, do not look directly into the light of the appliance or touch it, it could
!
be harmful to your health.
9.- Unplug the appliance from the power supply when you do not need to use it.
1
4

OPERATION

2
5
3
6
37