Herunterladen Inhalt Inhalt Diese Seite drucken

EuroLite AKKU PT-100/32 Pixel DMX Tube Bedienungsanleitung Seite 23

Pixel dmx tube
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not use the device near highly flammable materials. Always place the device at a location where
sufficient air circulation is ensured. Leave 50 cm of free space around the device. Never cover the air vents
of the housing.
Warning – risk of injuries
• Do not look directly at the light source. Persons with light-sensitive epilepsy may suffer from epileptic
seizures or fall unconscious.
• Make sure that the product is set up or installed safely and expertly and prevented from falling down.
Comply with the standards and rules that apply in your country, in particular EN 60598-2-17.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer.
Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions.
• For overhead use, always secure the device with a secondary safety attachment such as a safety bond or
safety net.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
device.
• For commercial use the country-specific accident prevention regulations of the government safety
organization for electrical facilities must be complied with at all times.
Caution – material damage
• This device must not be connected to the mains voltage by means of a dimmer.
• Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• Never switch the device on and off at short intervals. This will considerably reduce the service life of the
device.
• If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The
resulting condensation may destroy the device. Allow the device to reach room temperature before
connecting it. Wait until the condensation has evaporated.
• Please use the original packaging to protect the device against vibration, dust and moisture during
transportation or storage.
• If a serial number label is affixed to the device, do not remove the label as this would make the warranty
void.
Recharable batteries/batteries
• The given battery operating time depends largely on the operating mode and ambient temperature. Low
temperatures will reduce the operating time considerably. Before using the device for the first time,
completely charge the battery.
• The contained lithium-ion battery is subject to the Dangerous Goods Legislation requirements. The user
can transport the battery by road without further requirements. When being transported by third parties
(e.g.: air transport or forwarding agency), special requirements on packaging and labelling must be
observed. For preparation of the item being shipped, consulting an expert for hazardous material is
required. Dispatch battery only when the housing is undamaged. Tape or mask off open contacts and pack
up the battery in such a manner that it cannot move around in the packaging. Please also observe possibly
more detailed national regulations.
• Make sure that the poles are correct when inserting the remote control batteries. Never let batteries lie
around openly as there is the danger that these can be swallowed by children or domestic animals.
Immediately consult a doctor when batteries are swallowed! Leaking or damaged batteries can cause
irritations when getting into contact with the skin. In this case use appropriate protective gloves. Make sure
that the batteries cannot be short-circuited, thrown into the fire and be charged. There is a danger of
explosion.
23/36
00133960, Version 1.1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

41700350

Inhaltsverzeichnis