Gude GHS 510 G Handbuch Seite 16

2. Protect yourself against electric shock
Avoid contact with grounded parts as e.g. pipes, ranges, freezers etc.
3. Do not let any unauthorized persons approach the machine. The visitors and viewers, primarily the
children, the ill and infirm persons should not have any access to the working area. Prevent other
persons from any contact with the tools.
4. Make provision for the tools storage. The machines not in current use should be kept in a dry place,
elevated or locked where practicable so that any access to them is prevented
5. Always use a correct tool for the job to be done. E.g. avoid using small tools and accessories for
work that should be actually done with a professional tool. Use the tools only for the purposes they
were designed for.
6. Pay attention to adequate clothing. The clothing should fit the purpose and should not limit you when
working.
7. Use personal protective equipment. Wear safety shoes with steel toes/ steel or antislip sole.
8. Wear goggles. The objects may be shattered into your face.
9. Wear ear protectors. Wear personal protective equipment to protect your ears, such as ear
protectors.
10. Hands protection. Wear hard gloves – gloves of leather give a good protection.
11. Remove socket wrench. Before switching the shares on remove all the wrenches etc.
12. Do not use the cord for other than intended purposes
Do not misuse the cord by pulling it to unplug the unit from mains sockets, protect it from high
temperatures, oils and sharp edges.
13. Do not lean from your standing place
Prevent from unusual body positions. Provide for stability when working to keep balance anytime.
14. Prevent from accidental switching the machine
Never carry plugged into socket trimmer with finger in trigger ready position. When plugging into socket
be sure that the switch is OFF.
15. Extension cables for external use
- Use only splash-proof extension cables approved for external use and marked as such.
16. Be attentive any time. Mind what you are doing. Use common sense. Do not use the trimmer when
tired. Never work with the trimmer when influenced by alcohol, drugs or medicaments affecting the
concentration capability.
17. Watch out for any damaged parts. Inspect the machine before use. Are any parts damaged? Ask
yourself seriously when detecting slight damage whether the machine will work perfectly and safely
despite that. Watch out for proper aligning and adjustment of any moving parts. Do the parts fit one in
another properly? Are the parts damaged? Is everything installed as appropriate? Are any other
prerequisites of proper working in place? Damaged protective devices etc. must be repaired or
replaced by authorized entities unless the operation manual expressly says otherwise. Any defective
switches must be replaced at an authorized servicing centre. Do not use the machine if it cannot be put
on and off with the switch. In case of planned repairs kindly turn to your local servicing centre.
18. Switch off the unit motor before any adjustments or maintenance works. The same applies mainly to
the trimmer blade maintenance.
19. Use approved parts only. Use only identical spare parts for maintenance and repairs. Request advice
of an authorized servicing centre for this purpose.
The machine should not be used for other than intended purposes. Any deviation from the purpose shall be
considered an unauthorized use. Only the user, and never the manufacturer, shall be held liable for any
material and personal damage resulting from such an unauthorized use.
The manufacturer shall not perform any warranties if the machines manufactured by it are altered or used
in an unauthorized manner and if damage is inflicted in result.
5
GB