General Notes On Safety; General Safety Instructions For Power Tools - Grizzly EHS 900 L Originalbetriebsanleitung

Caution! Risk of injury from blades
in operation.
Pull out the power plug immedi-
ately if the cable is damaged, has
been badly twisted or is completely
cut through and in the event that
the device is left unattended for a
short time.
Caution! Hot surface.
Risk of burns.
Information of the acoustic power
level L in dB.
WA
Machines are not to be place with
domestic waste.
Safety class II
Cutting length

General Notes on Safety

Before working with the equip-
ment, familiarise yourself with all
operating components. Practice
handling the equipment and have
the function, operation and work-
ing methods explained to you by
an experienced user or special-
ist. Ensure that you can shut off
the equipment immediately in an
emergency. Inappropriate use of
the device may result in serious
injury.
If an accident or fault occurs during op-
eration, immediately switch off the device
and disconnect at the plug. Treat injuries
appropriately or consult a doctor. For the
correction of faults, read the "Trouble-
shooting" chapter or contact our service
centre.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated
power tools (with power cord) and to bat-
tery-operated power tools (without power
cord).
Work area safety
Keep work area clean and well
•
lit. Cluttered or dark areas invite
accidents.
• Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable Iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
• Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
• Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric
shock
GB
93