Werbung
GB
14. Sawing angle clamping knob
-
Shaft locking knob (Fig. D2)
D
Unpacking
The circular handsaw is shipped with:
NL
1
Rip fence
TCT Saw blade ∅ 185 mm
1
1
Allen key
F
Check first whether or not the delivery has been damaged by transport and/or whether all
the parts are present.
E
2. SAFETY INSTRUCTIONS
P
The following pictograms are used in these instructions for use:
I
Read instructions carefully
S
In accordance with essential applicable safety standards of European directives
SF
Class II machine – Double insulation – You don't need any earthed plug.
N
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
DK
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
06
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan
bestilles.
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er
så vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres
på en genbrugsplads.
Garanti
Læs det separat vedlagte garantikort for garantibetingelserne.
CE
Vi erklærer herved, udelukkende på eget ansvar, at dette
opfylder følgende standarder eller standardiserede dokumenter:
EN60745-1, EN60745-2-5, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3,
98/37/EC, 2006/95/EC, 2004/108/EC, 2002/95/EC, 2002/96/EC
01-08-2007
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor
til enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
Ferm
Ferm
KONFORMITETSERKLÆRING
FKS-185
i henhold til bestemmelserne i direktiverne:
Quality Manager Ferm Global
UK
D
NL
F
E
P
(DK)
I
S
SF
N
DK
J. Lodewijk
107
Werbung
Kapitel
