SAFETY PRECAUTIONS
SAFETY RULES AND RECOMMENDATIONS FOR THE INSTALLER
D
19.
o not try to install the conditioner alone, always contact specialized technical personnel.
C
20.
leaning and maintenance must be carried out by specialized technical personnel. In any case
disconnect the appliance from the mains electricity supply before carrying out any cleaning or
maintenance.
E
21.
nsure that the mains voltage corresponds to that stamped on the rating plate. Keep the switch
or power plug clean. Insert the power plug correctly and firmly into the socket, thereby avoiding
the risk of electric shock or fire due to insufficient contact.
D
22.
o not pull out the plug to switch off the appliance when it is in operation, since this could create
a spark and cause a fire, etc.
T
23.
his appliance has been made for air conditioning domestic environments and must not be used
for any other purpose, such as for drying clothes, cooling food, etc.
A
24.
lways use the appliance with the air filter mounted. The use of the conditioner without air filter
could cause an excessive accumulation of dust or waste on the inner parts of the device with
possible subsequent failures.
T
25.
he user is responsible for having the appliance installed by a qualified technician, who must
check that it is earth in accordance with current legislation and insert a thermos magnetic circuit
breaker.
T
26.
he batteries in remote controller must be recycled or disposed of properly. Disposal of Scrap
Batteries --- Please discard the batteries as sorted municipal waste at the accessible collection point.
N
27.
ever remain directly exposed to the flow of cold air for a long time. The direct and prolonged
exposition to cold air could be dangerous for your health. Particular care should be taken in the
rooms where there are children, old or sick people.
I
28.
f the appliance gives off smoke or there is a smell of burning, immediately cut off the power
supply and contact the Service Center.
T
29.
he prolonged use of the device in such conditions could cause fire or electrocution.
H
30.
ave repairs carried out only by an authorised Service Centra of the manufacturer. Incorrect
repair could expose the user to the risk of electric shock, etc.
U
31.
nhook the automatic switch if you foresee not to use the device for a long time. The airflow
direction must be properly adjusted.
T
32.
he flaps must be directed downwards in the heating mode and upwards in the cooling mode.
E
33.
nsure that the appliance is disconnected from the power supply when it will remain inoperative
for a long period and before carrying out any cleaning or maintenance.
S
34.
electing the most suitable temperature can prevent damage to the appliance.
2