2. Press the reset button for 5S and release, the green LED
will flash for network setting.
Network setting note:
• Press the button for 5s-10s, the red LED is on, it will turns
off after 5s. Then green LED is on. Release the reset button,
the green LED flashes for network setting.
• The green LED will be on for 5s then turns off to indicate
network setting succeeds, the product is in networking
detecting status. If network setting fails in 60s, the yellow
LED is on for 5s then turns off, the product is in standalone
working status.
Press the button for
5s then release.
5