Tesla SMART SENSOR SMOKE Benutzerhandbuch Seite 11

Alarm and Test
1. Detection state: The status indicator blinks red at 50s
intervals.
2. Self-checking state: When you press the mute/self-chec-
king button, the status indicator will turn red. If you press
and hold the mute/ self- diagnostic button for less than
5s, the product will enter the self-checking state, the status
indicator will flash red, and the buzzer will beep (same as
in alarm state).
(1) When the smoke density reaches the preset alarm
threshold, the product generates an alarm.
(2) During self-checking test, keep away from the buzzer to
avoid loud alarm sound from damaging your hearing.
(3) If the product generate an alarm when it is monitoring,
potential risks may exist. Do not ignore the alarm and try to
locate the cause.
11