Petsafe In-Ground Fence Bedienungsanleitung Seite 11

Double loop layout examples
C
G
B
G
Front or back property only
From the fence transmitter, run the wire to point A, then to point B
and so on (B to C to D to E to F). Next, make a U-turn and follow
your path all the way back to point G, keeping the wire separated
by at least 1.5 metres. When you get back to the house (G), make
a sharp turn along the side of the house back to point A. Finally,
twist the wires from point A and connect them back to the fence
transmitter.
D
F
A
Place
transmitter inside
A
E
A
Front boundary only
From the fence transmitter, run the wire to point A, then to point B.
Make a U-turn and follow your path back to point A, keeping the
wire separated by at least 1.5 metres. Then twist the wires from point
A and connect them back to the fence transmitter.
B
1 1