Product Assembly - cecotec Ready Warm Black Bedienungsanleitung

ENGLISH
the use of the appliance in a safe way and understand the
hazards involved.
• Supervise young children to make sure that they do not play
with the appliance. Close supervision is necessary when the
appliance is being used by or near children.

2. PRODUCT ASSEMBLY

Floor installation
• Attach the support feet to the product's bottom part using the ST12 x 4 mm screws
provided.
Wall installation
Warning: when installing the product, make sure to leave a minimum safety distance of 15 cm
from the floor to the device and 50 cm from the ceiling.
• Uninstall the brackets from the product's body. See image 1.
• Drill 2 holes on the wall where the product is going to be installed. The hole diameter must
match the screw diameter. Fix the bracket to the wall using the screws provided. See image 2.
• Fix the appliance to the wall bracket making sure the holes are aligned with the bracket.
See image 3.
• Tighten the screws from the bracket to the appliance in order to fix it securely. See image 4.
Distance between holes: Models 6650 and 6670: 28 cm. Models 6700 and 6720 : 44 cm Models
6750 and 6770: 60 cm. Screws 4x35 mm.
12 READY WARM CRYSTAL CONNECTION
Ready Warm Crystal Connection_Manual_SA.indd 12 14/8/19 18:01