Before Use; Product Assembly; Operation - cecotec 7400 Bedienungsanleitung

3. BEFORE USE

1. Take the product out of the box and remove all packaging materials.
2. Inspect the appliance for any visible damage, if it is observed, contact as soon as possible
the Technical Support Service of Cecotec for advice or reparation.
3. Place the heater on a flat and safe surface and make sure not to place under a power
socket.

4. PRODUCT ASSEMBLY

1. Remove the nuts form the base.
2. Pass the power cord through the base plate and
place it through the cable channel to ensure it is
properly secured.
3. Ensure that the base plate is firmly in position,
then gently screw the nuts in their correct place
and fix them firmly.

5. OPERATION

1. Insert the power cord into an earthed power outlet.
2. Turn on the power switch in order to activate the upper and middle heating ele-ments.
Power levels (
The heating power levels can be set by pressing the buttons placed on the bottom part of the
appliance.
• 0: OFF
• 1: ECO mode 400 W
• 2: Medium power 800 W
• 3: Maximum power 1200 W
Oscillation (
)
The appliance includes an oscillation-function button. Press once to activate it and press again
to deactivate it.
Timer ( )
Press the timer button to activate this function. The lights will turn on showing the selected time.
05327 Ready Warm 7300 Quartz Sky Smart-manual- MV.indd 11
)
READY WARM 7400 QUARTZ SKY SMART
ENGLISH
11
20/7/18 0:42