Water Treatment - Pentair Fleck 5800-XTRi Bedienungsanleitung

User Guide Fleck 5800-XTRi-XTR-SXT-LXT
Assistance interval screen
Use the assistance interval screen to set the interval. The controller will
display a message telling that the system need a service (optional). The
assistance interval can be based on a set number of months (month based) or
a number of regenerations (regen based).
interval
• Press the button to select a month-based or regen-based
assistance interval, then press
button (depending on your previous selection), and select the number of
months (up to 60) or regenerations (up to 2000) until the homeowner will
need to call for service;
• press to validate the selection and move to the home screen.
Home screen
On the upper left corner, the
current day and time. Theupper right corner indicates the remaining time or
volume to next regeneration. On the middle circle, the green box indicates the
current cycle step. The buttons down on the right allow to navigate through the
different screens. From left to right, we have:
diagnostics settings
, and
Day and time screen
day of week
Press the ,
the values to the correct day of week and time. Setting the value of the
PM/HR
button to HR changes the display to a 24 hour clock. Press the
month year
, and buttons to adjust the values to the correct date. Press
when finished to return to the home screen. Press
screen without saving.
Settings screen
Press to access the settings screen.
signal. Must be turn OFF, except for XTRi controller to open Bluetooth signal
during programming. It will automatically turn to OFF when WiFi is connected.
day override/time-driven
Press
regeneration in which a new regeneration will automatically be run whether
one is scheduled or not. Press
automatic regeneration cycle will begin.
and
Press to switch screens.
8 / 76
. Press either the
day and time
button allows to update the
regeneration
.
hour minute AM/PM/HR
, , and
Bluetooth
to adjust the number of days since last
regen. time
to adjust the time of day that an
month regen
or .
vacation assistance
, ,
buttons to adjust
AM/
day
,
to return to the home
turns ON the bluetooth
Assistance/Mainten. Interval
interval
month

Water Treatment

wed
12:01 am
treatment
tank refill
rapid rinse
Day And Time
17 jan
sat
12 01
Settings
Bluetooth
day override/
time-driven
regen. time
Ref. MKT-UG-054 / A - 03.06.2022
month
based
1
4.5
3
m
backwash
draw
15
pm
off
1 d
02:00 am