Connecting To A Videoconference System Using Audio Cables; Setting Up The Ext In/Out Terminals Function - Yamaha YVC-331 Benutzerhandbuch

Connecting to a videoconference system using audio cables

■ Check the following before the connection procedure
Make sure that you have two audio cables available for input and output.
Also, make sure that you have one PC or Mac for power supply.
Tip
Different models of videoconference systems may have different shapes of audio input and output terminals. Use
audio cables with their connector shapes that match the shapes of the audio input and output terminals of your
videoconference system. The product must be connected to a stereo mini plug, regardless of the type of the plug
connected to the videoconference system.
■ Connecting to a power source
Use the supplied USB cable to connect between the product and a PC or Mac.
The product receives power from the PC or Mac.
If the product is not connected to the PC or Mac, connect the supplied USB cable to a commercially
available USB power adapter.
Notes
• Make sure to first read the safety precautions for the USB power adapter you are going to use.
• Use the USB power adapter that is capable of supplying power compliant with the USB standard.
Output voltage: 4.8 to 5.2 V
Output current: At least 0.5 A

■ Setting up the EXT IN/OUT terminals function

Follow the steps in "Selecting a connected device on the EXT IN/OUT terminals" (page
the mode of the EXT IN/OUT terminals to the "Videoconference system" in advance.
To the USB terminal
YVC-331 User's Manual
21), switch
15