Pouch Jam Alert; Cleaning - Titanium Vision G60 Bedienungsanleitung

Pouch jam alert

− Follow the right document/pouch insert direction.
− Only run a lamination job within the Border mark.
− Only run a lamination job when READY light turns green.
− Check there is enough clear space (min. 500mm, 20") behind the
machine.

7. Cleaning

Burn hazard!
The laminator will become hot during operation.
− Always let the laminator cool off completely before you clean it.
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Never submerge the laminator in water.
− Make sure that no water penetrates the housing.
Risk of damage!
Water that has penetrated the housing may cause a short circuit.
− Never submerge the laminator in water.
− Make sure that no water penetrates the housing.
1. Disconnect the mains plug before cleaning.
2. Let the laminator cool off completely.
3. Use a damp cloth to wipe off the laminator. Let all parts dry completely afterwards.
Vision G60
27