Fault Diagnosis - LaserLiner ThermoCamera HighSense Bedienungsanleitung

18
Laserliner HighSense App (optional)
The HighSense app provides easy viewing and documentation of the measured results.
Switch on the WiFi interface on the thermal imaging camera and connect to the smart
phone. App functions include viewing videos in real time as well as taking and saving
screen shots. It is also possible to make text notes, export pdf reports, view image
information, and delete images. https://packd.li/ll/hs/ap
!
There is also a Help function to help with using the app.

Fault diagnosis

If problems occur when using the thermal imaging camera, take the following steps as shown in the table
below. Should the problem persist, please contact the UMAREX Laserliner service department.
Error
Device does not start
Device switches off suddenly
No heat image
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Calibration
The measuring device must be calibrated and tested on a regular basis to ensure it is accurate
and working properly. We recommend carrying out calibration once a year. Contact your distributor
or the UMAREX-LASERLINER service department.
52
EN
Reason
No battery / battery depleted
No power
Lens cover
on the device
Solution
Insert / charge battery
Charge battery
Remove lens cap