Spare & Wear Parts; Tightening Torques; Changing The Oil In The Drive Motor; General Description - Rohde TS 20 Originalbetriebsanleitung

DANGER
Risk of death!
Risk of electric shock.
Maintenance work on electrical components may only be carried out by a qualified
electrician.
12.2. Spare & wear parts
Replace defective components immediately. Only use ROHDE original spare parts.
INFORMATION
Spare parts and accessories that have not been supplied by the manufacturer have not
been tested and not approved.
⇒

12.3. Tightening torques

The following general tightening torques apply to screw connections on the pugmill if these are not specified in more
detail:
Thread Torque [Nm]
M3
M4
M5
M6
M8
M10
M12

12.4. Changing the oil in the drive motor

12.4.1. General description

The gear oil of the drive motor must be changed every 4,000 operating hours or 4 years, whichever comes first.
Note:
During use, make a note of the operating hours or the operating time of the machine in order to be able to comply
with these intervals.

12.4.2. General safety information

DANGER
Risk of personal injury and property damage!
For safety reasons, the power plug must be pulled out of the socket before any work is
carried out on the machine!
The manufacturer assumes no liability for damage caused by using such parts and
the guarantee is no longer valid.
1.5
3
6
10
25
49
80
48 / 191 - EN -