Training; Safety & Protective Work Clothing; Checking The Machine - Rohde TS 20 Originalbetriebsanleitung

DANGER
Risk of death!
Risk of electric shock.
DANGER
Risk of personal injury and property damage!
Only have maintenance, troubleshooting and repair work on the electrical components of
the pugmill carried out by qualified electricians.
All other work should only be carried out by qualified personnel.
DANGER
Risk of personal injury and property damage!
For safety reasons, the power plug must be pulled out of the socket before any work is
carried out on the machine!
WARNING
Risk of personal injury and property damage!
The transport and assembly of the pugmill should be carried out by at least 2 people due to
its heaviness.
NOTE
If the pugmill is used in school facilities or similar, it must be ensured that unauthorised
operation is not possible. It may only be operated under supervision.
3.3.

Training

The pugmill may only be operated by appropriately trained and qualified personnel. Above all, the operating
personnel must be trained accordingly in the operation and in the process of feeding the pugmill.
3.4. Safety & protective work clothing
The operating personnel must wear appropriate protective clothing. The manufacturer assumes no liability for
property damage or personal injury!
3.5.

Checking the machine

When operated industrially, the pugmill must be checked at appropriate intervals by a qualified electrician to ensure
that it is in proper and perfect condition in accordance with DGUV Regulation 3 (German Social Accident Insurance)
or the corresponding national regulation of the country of operation.
34 / 191 - EN -