Vetus GHS4 Bedieningshandleiding Seite 59

Fault Finding Table
GHS6.5, GHS8, GHS14, GHS24, GLS6.5, GLS14 and GLS25
7 Load, generator gets too hot
Possible Cause
• Over-loaded.
• Voltage too high.
• Blocked air inlet or outlet.
• Hot air from engine and or
generator is being used
again as cooling air.
Solution
• Reduce the load by switch-
ing off some of your electri-
cal equipment.
• Adjust the Voltage Regulator
to the correct voltage.
• Clear the air inlet and outlet.
• Prevent recirculation of hot
air.
Fault Finding, generator
7
57