Transporting/Storage; Technical Specifications - Load Up 75012 Gebrauchsanleitung

If a used plug is being reinstalled, it should only require 1/8 to 1/4 turn after
being seated.
9.Reinstall the spark plug cap on the spark plug securely.
10.Reinstall the spark plug maintenance cover.
CAUTION
The spark plug must be securely tightened. An improperly tightened plug can
■
become very hot and possibly damage the generator.
Never use a spark plug with an improper heat range.
■

8. TRANSPORTING/STORAGE

To prevent fuel spillage when transporting or during temporary storage, the
generator should be secured upright in its normal operating position, with the
engine switch OFF. Turn the cap lever fully counter clockwise to the "OFF"
position.
WARNING: when transporting the generator:
Do not overfill the tank (there should be no fuel in the filler neck).
■
Do not operate the generator while it is on a vehicle.
■
Take the generator off the vehicle and use it in a well ventilated place.
Avoid a place exposed to direct sunlight when putting the generator on a
■
vehicle. If the generator is left in an enclosed vehicle for many hours, high
temperature inside the vehicle could cause fuel to vaporize resulting in a
possible explosion.
Do not drive on a rough road for an extended period with the generator on
■
board. If you must transport the generator on a rough road, drain the fuel
from the generator beforehand.
Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain out the fuel completely.
WARNING: gasoline is extremely flammable and explosive under certain
conditions. Do not smoke or allow flames or sparks in the area.

9. TECHNICAL SPECIFICATIONS

Article no.
Type
75012
Converter
35