Technical Specifications; Symbols Used - Silvercrest SLIM SSMS 1350 B2 Bedienungsanleitung

Fault
No more water/steam comes
out of the steam nozzle 10 af-
ter 120 seconds.
21. Technical
specifications
Model: SSMS 1350 B2
Mains voltage: 220 – 240 V ~ 50/60 Hz
Protection
class: I
Power rating: 1350 W
Filling volume at least 250 ml (MIN)
of the water maximum 1,000 ml
tank: (MAX)
Pressure: 15 bar
Automatic
switch off: after 30 minutes
NOTE: no action by the user is required to
switch the product between 50 and 60 Hz.
The product adjusts itself for both 50 and
60 Hz.
86 GB
Possible causes / Action
• This is normal. This is a protective function. Set the di-
al 4 back to OFF. Check that there is enough water
in the water tank 6. You can then immediately use the
function again.

Symbols used

Subject to technical modifications.
Geprüfte Sicherheit (certified
safety): devices must comply with
the generally acknowledged
rules of technology and the Ger-
man Product Safety Act (Produkt-
sicherheitsgesetz - ProdSG).
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials are marked
with the recycling symbol (3 ar-
rows). The material can be speci-
fied by the recycling number in
the centre (here: 21) and/or an
abbreviation (here: PAP).
AC voltage
The symbol identifies parts that
can be cleaned in the dishwasher.