English
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
18.
Malfunction in blower or battery.
7
Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH
" LED next to the
lights up blue for approximately 3 seconds.
®
The Bluetooth
radio interface on the battery
is activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH
" LED next to the
lights up blue six times.
®
The Bluetooth
radio interface on the battery
is deactivated.
8
Assembling the Blower
8.1
Mounting, Adjusting and
Removing the Nozzle
The nozzle can be mounted to the blower tube in
three positions to suit the height and reach of the
user. The positions are marked on the blower
tube.
► Switch off the blower and remove the battery.
1
2
► Line up the lug (3) and the slot (2).
► Push nozzle (1) into required position on
blower tube (4).
► Rotate nozzle (1) until it engages.
22
7 Activating and Deactivating Bluetooth® Radio Interface
Radio
®
®
radio interface:
symbol
®
®
radio interface:
symbol
3
4
9
Removing and Fitting the
Battery
9.1
Inserting the Battery
2
► Insert the battery (1) into the battery compart‐
ment (2) as far as it will go.
The battery (1) engages with a click and is
now locked.
9.2
Removing the Battery
► Place blower on a level surface.
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
► Press both locking levers (1).
The battery (2) is released and can be
removed.
10 Switching the Blower
On/Off
10.1
Switching On the Blower
► Hold the blower by the control handle with one
hand, wrapping your thumb around the control
handle.
1
1
2
1
3
2
0458-824-9821-B