Power Tool Use - Bosch GBH Professional 2-28 D Originalbetriebsanleitung

OBJ_BUCH - 1232 - 004 .book Page
 Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
 If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not force the power tool. Use the
and care
correct power tool for your application. The correct
power tool will do the job better and safer at the rate
for which it was designed. Do not use the power
tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is
dangerous and must be repaired.
 Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
 Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
 Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
 Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
 Secure the workpiece. A workpiece clamped with
secure than
Bosch Power Tools
11 Wednesday, April 20, 2011 1:00 PM
Hammer Safety Warnings
 Wear ear protectors. Exposure to noise can cause

Power tool use

 Use auxiliary handle(s), if supplied with the tool. Loss
 Hold power tool by insulated gripping surfaces, when
Products sold in GB only: Your product is fitted with a BS
1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it
should be cut off and an appropriate plug fitted in its
place by an authorised customer service agent. The
replacement plug should have the same fuse rating as
the original plug. The severed plug must be disposed of
to avoid a possible shock hazard and should never be
inserted into a mains socket elsewhere. Products sold in
AUS and NZ only: Use a residual current device (RCD)
with a rated residual current of 30 mA or less.
Additional Safety and Working
Instructions
 Observe correct mains voltage! The voltage of the
 Use appropriate detectors to determine if utility
 Firmly tighten the auxiliary handle, hold the machine
Symbols
will ensure that the safety of the power tool is
maintained.
hearing loss.
of control can cause personal injury.
performing an operation where the cutting accessory
or fastener may contact hidden wiring. Cutting
accessory and fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
power source must agree with the voltage specified
on the nameplate of the machine. Power tools
marked with 230 V can also be operated with 220 V.
lines are hidden in the work area or call the local
utility company for assistance. Contact with electric
lines can lead to fire and electric shock. Damaging a
gas line can lead to explosion. Penetrating a water line
causes property damage.
firmly with both hands while working and keep
proper footing and balance at all times. The machine
is securely guided with both hands.
clamping devices or in a vice is held more
1 619 929 877 | (20.4.11)