FS S3910 Serie Schnellstartanleitung Seite 7

LEDs Status
Off
Blinking Green
Solid Green
STATUS
Solid Yellow
Solid Red
Off
PWR1/PWR2 Solid Green
Solid Red
Off
ID
Solid Blue
Off
Solid Green
RJ45 Blinking Green
Solid Yellow
Blinking Yellow
Off
SFP+ Solid Green
Blinking Green
6
Description
Switch is not receiving power.
System is being initialized.
Switch is operational.
Moderate temperature warning:
Check the working environment of the switch immediately.
1. Severe temperature warning:
The temperature severely exceeds the temperature limit, so
the system is going to restart.
2. The switch is faulty.
No power supply module is connected.
A power supply is connected and able to work.
A redundant power supply fails or no AC cable is connected.
Locating is disabled.
Locating is enabled. Operation and maintenance staff turn
on and off the LED remotely.
The port is not connected.
The port is connected at 1000 Mbps.
The port is receiving or transmitting traffic at 1000 Mbps.
The port is connected at 10/100 Mbps.
The port is receiving or transmitting traffic at 10/100 Mbps.
The port is not connected.
The port is connected.
The port is receiving or transmitting traffic.