Ufesa Twist Bedienungsanleitung Seite 19

EN
DO NOT place your Air Fryer under cupboards, blinds or curtains. Risk of overheating / fire.
Do not cover any part of the Fryer with a cloth or similar, it will cause overheating. Risk of fire.
This is an AIR FRYER. It requires very little oil to cook. Do not fill the pot with oil or fat as this may
cause a fire hazard.
Do not use any accessories other than manufacturer recommended accessories in this Air Fryer.
Always wear protective, insulated oven gloves when inserting or removing items from the hot Air
Fryer.
The appliance must be used on a level, stable heat-resistant surface. The first time you use your Air
Fryer there may be a slight odor or a small amount of smoke given off. This is normal and is just the
manufacturing residues burning off.
Always place the ingredients to be fried in the basket to prevent it from coming into contact with
the heating elements.
Unplug the product immediately from the mains in the event of any breakdown or damage and
contact an official technical support service. In order to prevent any risk of danger, do not open the
device. Only qualified technical personnel from the brand´s Official technical support service may
carry out repairs or procedures on the device.
B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to people,
animals or objects as a result of failure to observe the aforementioned warnings.
BEFORE ITS FIRST USE
1. Remove all packing materials and stickers from the inside and outside of the Air Fryer. Gently
wipe down exterior with a damp cloth or paper towel.
WARNING: Never immerse the Air Fryer or its plug in water or any other liquids.
2. Pull the basket handle to remove the basket from the Air Fryer. Use the tray handle, in the center
of the tray, to remove the tray. Use a sponge and warm, soapy water to wash the inside and outside
of the basket and tray. The basket and the tray are top-rack dishwasher safe.
3. WARNING: Do not use abrasive cleaning agents or scouring pads.
4. Dry thoroughly.
HOW TO USE
1. Standby mode: Connect the mains plug to an earthed wall socket.
The buzzer will sound, the power key will bink and and the display will shows "----".
2. How to start: Press the "Power" key to switch on the device, the menu LED light is on.
Press the Menu key to change from the different modes. Each time you press the menu key, the
mode is selected from left to right. After the working mode is selected, press the temperature or
time adjustment key to adjust the temperature and time parameters within 10s. The program will
start automatically after 10s.
If no working mode is set within 60s after pressing the power key, the setting will be displayed and
the standby mode will be restored.
3. Adjust time the temperature: You can adjust the time and temperature of each mode by pres-
sing the keys up and down in the first 10 seconds after selecting the mode.
Note: The adjustable temperature is 80C ~ 200c; The time is from 00:01 to 00:60 min.
19