5. Open the safety lock.
Illustration R
6. Fill the steam boiler with water and
swing it around vigorously. Lime residue
which has been deposited on the bottom
of the steam boiler will be released as a
result.
7. Drain the water completely out of the
steam boiler.
Illustration S
Clearing the boiler
The water in boiler can be empty by CLE
Mode:
1. Remove the water reservoir.
2. Turn on the device.
3. Press the steam trigger for 3 times until
the LED light flashes green and a long
beep is emitted.
4. Steam will be available until the water in
the boiler is empty.
Storing the device
1. Connect the extension tubes to the large
mounts for accessories.
2. Connect a manual nozzle and spotlight
nozzle to each extension tube.
3. Fasten the large round brush to the spot-
light nozzle.
4. Hang the floor nozzle in the park brack-
et.
Illustration O
5. Wrap the cable and place it in the acces-
sory compartment.
Illustration Q
6. Wrap the steam hose and place it in the
accessory storage area.
Illustration P
7. Place the small round brush and crevice
brush in the accessory storage area.
8. Store the device in a dry location that is
protected from frost.
Important application
instructions
Cleaning the floor areas
We recommend sweeping the floor or vac-
uum cleaning it before using the appliance.
In this way the floor will be cleared of dirt
and loose particles before the wet cleaning.
Freshening up textiles
Prior to using the appliance, always check
the compatibility of the textiles at a con-
cealed point: Steam down the textile, allow
it to dry and then check it for any change in
colour or shape.
Cleaning coated or painted surfaces
ATTENTION
Damaged surfaces
Steam can loosen wax, furniture polish,
plastic coatings or paint and edge band
from edges.
Do not direct the steam at glued laminated
edges as the edge band may loosen.
Do not use the appliance for cleaning un-
sealed wood or parquet floors.
Do not use the appliance for cleaning paint-
ed or plastic coated surfaces such as kitch-
en or living room furniture, doors or
parquet.
1. To clean these surfaces, steam a cloth
briefly and use it to wipe over the surfac-
es.
ATTENTION
Glass breakages and damaged surfaces
Steam can damage sealed points of the
window frame and, at low outside tempera-
tures, lead to tension on the surface of win-
dow panes and hence to glass breakages.
Do not direct the steam at sealed points on
the window frame.
At low outside temperatures, heat up the
window panes by gently steaming the full
surface of the glass.
Clean the window area with a manual
nozzle and cover. To remove the water,
use a squeegee or wipe the surfaces
dry.
How to use the Accessories
The steam gun can be used for the follow-
ing applications without accessories:
● For removing slight creases from the
hanging clothing items: Steam the cloth-
ing item from a distance of 10-20 cm.
English
Glass cleaner
Steam gun
17