Version With Relay Output - bürkert 8039 Bedienungsanleitung

4 installation
4.3. Version with pnp transistor output via m12 connector
Receiver
Sensor
V+
V+
PNP IN
PNP
output
Load
0 V 0 V
(*)
pnp output

4.3.6 Version with relay output

1
Common
relay output
wiring of fixed
connector 3
en 175301-803
Normally Open
All manuals and user guides at all-guides.com
PNP transistor output
4 3
(*)
5
1 2
V+
Not connected
(12-30 VDC)
pnp wiring of m12 fixed
connector
Not connected
Normally Closed
2
pin number of the m12 cable available as
an accessory (order code 438680)
0 VDC
The controller is fitted with a steerable M12 fixed
connector:
Unfasten counternut. Turn the fixed connector to the
right position, but by max. 360° to avoid twisting of the
cables inside the housing. Fasten counternut using the
appropriate tool while maintening the fixed connector in
the right position.
Not connected
(*)
(12-30 VDC)
Wiring of fixed connector m12 (12-30 Vdc power supply)
flow rate controller 8039
Wire colour
1 brown
2 white
3
4 black
5
0 VDC
4 3
5
2
1
Not connected
V+
blue
grey