Before First-Time Use; Assembly And Installation; Charging The Battery; Switching The Cordless Magnetic Lamps On/Off/Setting Timer - LIVARNO LUX 970-K Bedienungs- Und Sicherheitshinweise

fire. They may explode or cause toxic
fumes�
Do not expose rechargeable batteries to
„
unlimited amounts of sunlight or heat�
Do not take rechargeable batteries apart or
„
short-circuit them�
Charge the battery at normal room
„
temperature (approx� 20 °C)�
Use only an SELV mains adaptor for
„
charging�
z Before first-time use
Check that all package contents are present�
Inspect the cordless magnetic lamps
the USB charging cable
external damage. If you find any signs of
damage, do not use the cordless magnetic
lamps� Please contact Customer Service at
the address indicated�
Unpack all parts of the product� Remove the
packaging material� Keep the packaging in
a safe place out of the reach of children�
There is a risk of suffocation if children are
allowed to play with packaging material�
z Assembly and installation
Please note: Dispose of all packaging
material�
Take the magnetic holder with the adhesive
pad and pull off the protective strip (see
8
Fig� D)� Now stick the magnetic holder in the
desired position� To ensure good adhesion,
make sure the surface is flat, dry and free of
grease� Fix the cordless magnetic lamp
the magnetic holder
integrated magnet
7
C)�
Please note: Removing the adhesive pad
may cause damage to the surface in some
cases� We can accept no liability for such
damage� When the battery needs to be
recharged, the magnetic lamp can simply be
removed from the magnetic holder
Fig� C)�
8
GB
and
1
for any signs of
9
1
with the aid of the
8
in the casing (see Fig�
(see
8
The holes on the back have no function�
z Charging the battery
Risk of electric shock!
The cordless magnetic lamps
be recharged in dry indoor areas using an
SELV mains adaptor� Before using the
cordless magnetic lamp
please fully charge the battery� To do so, use
only the USB charging cable supplied
Plug the USB charging cable supplied
„
into the micro-USB socket
cordless magnetic lamp (see Fig� F)�
To charge the lamp, connect the USB
„
charging cable
(5 VDC, max� 0�34 A)�
Plug the USB mains adaptor into a power
„
outlet socket�
The charging time is approx� 2-3 hours� The
charge indicator
cordless magnetic lamp is fully charged� As
soon as the cordless magnetic lamp
fully charged, the charge indicator
green� You can then unplug the USB mains
adaptor from the power outlet socket and
disconnect the USB charging cable
the cordless magnetic lamp
z Switching the cordless
magnetic lamps ON/OFF/
Setting timer function
The cordless magnetic lamps have three
functions: Permanently on, 3-minute timer
to and 15-minute timer� For the permanently on
function, set the OFF/15M/3M/ON switch
to the ON position and press the ON/
4
OFF switch � For the 3-minute timer
2
function, set the OFF/15M/3M/ON switch
to the position 3M and press the ON/
4
OFF switch � The cordless magnetic lamps
2
will then switch off automatically after 3
minutes� For the 15-minute timer function, set
the OFF/15M/3M/ON switch
position 15M and press the ON/OFF switch
should only
1
for the first time,
1
on the
6
to a USB mains adaptor
9
remains red until the
5
1
5
9
�
1
to the
4
�
9
9
is
shows
from