Specifications; Stihl Ap Battery - Stihl FSA 86 R Gebrauchsanleitung

English
Fault LEDs on the
battery
3 LEDs light
up red.
4 LEDs fla‐
shing red.
The brushcutter 3 LEDs light
cuts out during up red.
operation.
The runtime of
the brushcutter is
too short.
Mowing head
cannot be
unscrewed by
hand.
STIHL connected
app is unable to
find the battery
with .
19.2 Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information, please visit
https://support.stihl.com or www.stihl.com.

20 Specifications

20.1 STIHL FSA 86 R Brushcutters
– Permitted batteries:
– STIHL AP
– STIHL AR
32
Cause
Trimmer is too hot.
There is a fault in the
battery.
No electrical contact
between brushcutter
and battery.
The brushcutter or
battery is damp.
Trimmer is too hot.
There is an electrical,
electromagnetic mal‐
function.
The battery is not fully
charged.
The battery life has
been exceeded.
Mowing head over‐
tightened.
®
Bluetooth radio inter‐
face on the battery or
mobile device is deac‐
tivated.
Distance between bat‐
tery and mobile
device is too long.
– Weight without battery, with cutting tool and
with deflector: 3.2 kg
– Length without cutting tool: 1725 mm
– Degree of electrical protection: IPX4 (protec‐
tion against splash water from any direction)
For runtime, see www.stihl.com/battery-life.
20.2
– Battery technology: lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: + 10 °C to + 50 °C
Remedy
► If 3 LEDs continue to flash red: Do not
use your brushcutter and contact your
STIHL dealer for assistance.
► Remove the battery.
► Allow trimmer to cool down.
► Remove battery and reinsert it.
► Switch on the brushcutter.
► If 4 LEDs continue to flash red: Do not
use the battery; contact a STIHL authori‐
zed dealer.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Allow the brushcutter or battery to dry.
► Remove the battery.
► Allow trimmer to cool down.
► Remove battery and reinsert it.
► Switch on the brushcutter.
► Recharge the battery fully as described in
the User Manual for the STIHL AL 101,
301, 301-4, 500 chargers.
► Replace battery.
► Block the fanwheel with the stop pin.
► Unscrew mowing head by hand.
► Remove the stop pin.
► Activate Bluetooth
®
battery or mobile device.
► Reduce distance,
► If the battery still cannot be found with
the STIHL connected app: Contact a
STIHL authorized dealer for assistance.

STIHL AP battery

20 Specifications
radio interface on the
20.2.
0458-833-9821-C