Philips HD7825 Benutzerhandbuch Seite 14

EnglisH
14 14
6 Close the lid and lock the lever.
It is not possible to brew coffee when the lid is not
properly closed and the lid lever is not locked. In
this case, the light ring around the on/off button
flashes intermittently.
7 Place one cup or two cups under the
spout openings. You can adjust the height
of the coffee spout by sliding it upwards or
downwards.
The cups you use should have a capacity of at least
150 ml. Do not use cups that are too large, as
they cause the coffee to get cold more quickly.
8 Press the button indicating the number of cups
of SENSEO
®
- Press the 1-cup button q for one cup.
- Press the 2-cup button qq for two cups.
, The SENSEO
- The machine automatically supplies the optimal
amount of water.
- You can interrupt the brewing process at any time
by pressing the on/off button 3. If you switch
the machine back on after having interrupted the
brewing process, the machine does not complete
the interrupted brewing cycle.
Do not remove the water reservoir during a
brewing cycle, as this causes the machine to
draw in air. When this happens, the next cup is
only partly filled.
Note: If no coffee comes out of the machine, you have
not flushed the machine before first use. As a result,
the boiler is not filled. Flush the machine as described
in chapter 'Before first use' before you start brewing
coffee. If only a small amount of coffee comes out of
coffee you want to brew.
coffee machine starts brewing.
®