Brandson Equipment 305663 Bedienungsanleitung Seite 25

• If the device is operated incorrectly
or misused, we do not accept liability
for any resulting damage.
• Make sure that the power cable is al-
ways connected correctly and firmly.
A loose connection can cause the ca-
ble and socket to heat up and result
in damage or even a fire.
• WARNING! Do not damage the cool-
ant circuit.
• Before using the device for the first
time, place it on its feet in a desired
location and leave it switched off for
24 hours so that the coolant can set-
tle in the correct place. When trans-
porting the device again, please let
it stand for 2 hours before putting it
into operation. If you do not do this,
the compressor may be damaged.
English
25