Calpeda META Betriebsanleitung Seite 93

THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN
IF PARTIAL, IS FORBIDDEN
SUMMARY
1. GENERAL INFORMATION ........................... 11
2. TECHNICAL DESCRIPTION ........................ 12
3. TECHNICAL FEATURES .............................. 12
4. SAFETY ........................................................ 12
5. TRANSPORT AND HANDLING .................... 13
6. INSTALLATION ............................................. 13
7. PROGRAMMING GUIDE.............................. 14
8. STARTUP AND OPERATION ....................... 16
9. MAINTENANCE ............................................ 17
10. DISPOSAL .................................................... 17
11. ALARMS ....................................................... 18
12. WARNING ..................................................... 18
13. TROUBLESHOOTING .................................. 19
ELECTRICAL DIAGRAM ....................................... 38
Minimum cross-sectional area of conductors ........ 39
Declaration of conformity ....................................... 40
1. GENERAL INFORMATION
Before using the product carefully read the information
contained in this instruction manual, the manual should
be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety requirement
and must be retained until the product is finally de-
commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
Any changes, alterations or modifications made to the
product or part of it, not authorized by the manufacturer,
will revoke the "CE declaration" and warranty.
This appliance should not be operated
by children younger than 8 years,
people with reduced physical, sensory
or mental capacities, or inexperienced
people who are not familiar with the
product, unless they are given close
supervision or instructions on how to
use it safely and are made aware by a
responsible person of the dangers its
use might entail.
Children must not play with the
appliance.
It is the user's responsibility to clean
and maintain the appliance. Children
should never clean or maintain it
unless they are given supervision.
Do not use in ponds, tanks or
swimming pools or where people
may enter or come into contact
BS.V .META Rev1_ - Operating Instructions
with the water.
Read carefully the installation
section which sets forth:
- The maximum
structural
(chapter 3.1).
- The type and section of the
power cable (chapter 15).
- The type of electrical protection
to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below are
indicated the symbols used with the related meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
Notes and warnings for the correct management
i
of the machine and its parts.
Operations that could be performed by the final
user. After carefully reading of the instructions,
is responsible for maintenance under normal
conditions. They are authorized to affect
standard maintenance operations.
Operations that must be performed by a
qualified electrician. Specialized technician
authorised to affect all electrical operations
including maintenance. They are able to
operate with in the presence of high voltages.
Operations that must be done performed by
a qualified technician. Specialized technician
able to install the device, under normal
conditions, working during "maintenance",
and allowed to do electrical and mechanical
interventions for maintenance. They must
be capable of executing simple electrical
and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
Operations that must be done with the device
switched off and disconnected from the power
OFF
supply.
Operations that must be done with the device
switched on.
ON
1.2. Manufacturer name and address
Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it
permissible
working pressure
damage or compromise
Page 11 / 40
EN