Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting vacuum line
1. As described in section 16, connect the T-piece to the vacuum line (1) of the brake booster to
pick up the negative pressure. The magnet valve is placed here (2).
2 2
2. Now connect the check valve and magnet valve to the vacuum hose.
3. Insert the check valve at a suitable point in the vacuum line (direction
note).
4. Lay the vacuum line to the exhaust system to existing lines on the underbody or as previously
described.
described.
Vacuum line
Exhaustvalve
Installation example
BULL-X TRONIC Control unit
in an VW UP! GTI
errors and omissions excepted
1
1
It's done ! You have successfully installed your
Bull-X Tronic control unit. We wish you a lot
of fun with the product and your vehicle. For
questions or problems during or after the
Assembly please contact:
HG-MOTORSPORT
Telefon: +49 (0) 451 40 94 600
E-Mail: info@hg-motorsport.de
Werbung
