Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Congratulations on your purchase of the BULL-X TRONIC exhaust valve control unit. We are dedica-
ted to give you pure enjoyment with the BULL-X TRONIC system in combination with your vehicle.
Therefore, follow these installation instructions step by step to avoid mistakes during installation.
Due the guarantee duty, the installation of the Bull-X Tronic control unit has to be taken over by a professional company.
The buyer has to present a suitable invoice in the guarantee case. Damages cannot be complained to selfassembly by
Caution: Do not solder the cables on the Bull-X Tronic or mount them with electricity thie-ves
For installation needed:
• sidecutter
• 10 mm spanner or ring-spanner
• Insulating Tape
• Plastic wedge
Note: If you are not able to do the mounting, please contact an competent workshop.
not certifi ed third.
or crimp connectors, etc.
• head screwdriver
• cutterknife
• solid wire or similar
Installation example
BULL-X TRONIC Control unit
in an VW UP! GTI
errors and omissions excepted
Werbung
