Buzzer On/Off - VATECH EzRay Air Portable VEX-P300 Bedienungsanleitung

5. Service Mode
5.3.9

Buzzer On/Off

Perform this mode to turn On/Off the buzzer. In the case of 'buzzer On,' there are three
options: battery level 1 (flickering) warning only, Sleep Mode 2 warning only, or both.
(For details about battery levels, see '4.6 Using the Battery.'
To change the buzzer On/Off setting,
1. Select n.22 by pressing the jog dial, then the default setting "000" (buzzer Off) is
displayed on the Control Panel as shown in the following figure (right).
2. Turn the jog dial to select an option out of the four options as described below.




3. Save the setting, and check if it has been correctly saved.
52
Service
Mode No.
n.22
"000" = Buzzer Off (default)
"001" = Buzzer On for battery level 1 (flickering) warning only
"002" = Buzzer On for Sleep Mode 2 warning only
"003" = Buzzer On for both
EzRay Air Portable (Model: VEX-P300) User Manual
Item
Buzzer On/Off