Operating Elements - Bosch ErgoMixx MFQ363 Serie Gebrauchsanleitung

▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶ Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
▶ Process hot food carefully.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Avoiding material damage
▶ Do not operate the appliance at no-load.
Overview
→ Fig.
1
Switch
1
Ejector button
2
Aperture for inserting the tools
3
Cable clip
4
Stirring whisks
5
Kneading hooks
6
Universal cutter
7
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.

Operating elements

Ejector button
For removing the tools.
Note: The ejector button can only be actu-
ated if the switch is position ⁠ .
1
1 2
Avoiding material damage en
Switch
Symbol Function
switched off
lowest speed
highest speed
Instantaneous switching
⁠
(highest speed) press to
the left and hold in place
Tools
Beating whisks
The beating whisks are suitable for the
following applications:
¡ beat egg whites or cream
¡ make light dough such as e.g. sponge
mixture, cake mixture, pancake batter
Recommendations for optimum results:
¡ Use cream with a fat content of at least
30% and when at 4-8 °C
¡ Whip cream or beat egg whites in a wide
jug
Note
The stirring whisks are not suitable:
¡ for making mayonnaise
¡ for processing heavy dough
11