Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Maintenance, cleaning and recalibration
7. Maintenance, cleaning and recalibration
Personnel: Skilled personnel
EN
Protective equipment: safety goggles, protective gloves
For contact details, please see chapter 1 "General information" or the back
page of the operating instructions.
7.1
Periodic maintenance
Repairs must only be carried out by the manufacturer.
Only use original parts (see chapter 10 "Accessories").
Cleaning the units and checking the liquid levels is the only periodic maintenance
required. With normal use, no further maintenance should be necessary. If required,
the system can be returned to the manufacturer for re-conditioning. Accuracy, overhaul
and recertification are also explained in chapter 7.4.1 "Overhaul and recertification of
dead-weight testers, maintenance of accuracy".
Liquids, which attack ABS, should be used with caution. Continuous
immersion of the case cover in such liquids will cause damage. Spillages
should be wiped off immediately.
7.2
Corrective maintenance
7.2.1 General information
This section contains details on stripping the unit and replacing the spare parts which are
listed (see chapter 10 "Accessories"). The component identification numbers in brackets
in each procedure refer to the following drawing.
30
WIKA operating instructions, model CPB3800HP
Werbung
Inhaltsverzeichnis
