Cleaning, Maintenance, Storage, Disposal; Cleaning; Maintenance - Zipper Maschinen ZI-ZSM600 Betriebsanleitung

1 Cutting Trolley
3 Fixing Parts
16

CLEANING, MAINTENANCE, STORAGE, DISPOSAL

Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or death.
 Always disconnect the machine from the power supply before maintenance or repair
work and secure it against unintentional reconnection.
16.1

Cleaning

Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
Incorrect cleaning products can attack the finish of the machine. Do not use any solvents,
nitro thinners or other cleaning products that could damage the machine's finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
Therefore, clean the machine after each use and remove any dust and other deposits with a
•
damp cloth and, if necessary, with a mild detergent.
16.2

Maintenance

The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
could affect your safety must be repaired immediately!
Before each operation, check the perfect condition of the safety devices.
•
Regularly check the perfect and legible condition of the warning and safety labels of the
•
machine.
Use only proper and suitable tools.
•
Use only original spare parts recommended by the manufacturer.
•
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
2 Material to be cut
4 Saw
WAR N I N G
N O TI C E
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Example of correct use of the machine with
regard to workpiece clamping:
Workpiece securely fixed on sliding carriage
Workpiece height / width / length < max. cut-
ting capacity
33
ZI-ZSM600