Network Settings - Grundfos CIM 500 Montage- Und Betriebsanleitung

A.1.11. Network settings
This web page is used to configure the network settings of the webserver and of the GENIpro TCP protocol. The
network settings here are also used for BACnet IP. Additional configuration of BACnet IP is done in the Real
Time Ethernet Protocol menu. See the section about EtherNet/IP configuration in the appendix.

Network settings

Object Description
Configuration of the static IP address if a DHCP server is not used.
IP Address
Default: 192.168.1.100.
Configuration of the subnet mask if a DHCP server is not used.
Subnet Mask
Default: 255.255.255.0.
Configuration of the gateway address if a DHCP server is not used.
Gateway
Default: 192.168.1.1.
The module can be configured to use a specific domain name server, if available on the
network.
DNS Server
Default: 0.0.0.0.
The module can be configured to automatically obtain the IP address from a DHCP
server, if available on the network.
Use DHCP
Default: Do not use DHCP.
Related information
A.1.8. EtherNet/IP configuration
293