Dismantling - KIDDY Fix Bedienungsanleitung

The final installation step is to adjust the support base (G).
To achieve this, activate (1) the yellow support base handle (I) and pull the
support base (G) out until it stands firmly on the floor of the vehicle and both
support foot displays indicate red (Fig. 8).
Lift the platform slightly up if necessary.
Check that the mechanical parts latch in correctly by trying to retract the sup-
port base (G) without activating the support base handle (I). If the support
base (G) is not moving, it is properly latched.
Your kiddyfix must always be used with folded out and correctly adju-
sted support base (G)!
Now you can install your kiddy child safety car seat according to its
instruction manual on the kiddyfix (A).
Prior to every trip, check whether all systems are correctly latched, or
adjusted.

5. Dismantling

First remove the kiddy child safety car seat from the kiddyfix platform (A) as
explained in its instruction manual.
Now you can start with dismantling the platform (A).
Keep both ISOFIX unlatch buttons (E) pressed in and simultaneously pull the
platform (A) from the brackets downwards to the front (Fig. 9).
The support base (G) can now be retracted and the support leg (F) folded in
under the platform (A). When the support base (G) is pulled out now
(Fig. 10), it remains anchored under the platform (A).
7
ENG