AKASO V50 Elite Bedienungsanleitung Seite 15

EN
2. ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image.
3. Time Lapse Interval: Unlimited/3 Sec/5 Sec/10 Sec/30 Sec/1 Min
Default setting is Unlimited.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode
to capture photos of any activity, then choose the best ones later.
Note: Time Lapse Photo is disabled when Burst Photo is on.
4. Time Lapse Duration: Unlimited/5 Min/10 Min/15 Min/20 Min/30 Min/60 Min
Default setting is Unlimited.
Note: If you want to set Time Lapse Duration, please turn on Time Lapse Interval first.
5. Night Lapse: On/Off
Default setting is Off.
Captures a series of photos at specific intervals and exposure times. Use Night
Lapse in low light environments, such as when capturing the night sky over a period
of time.
6. Burst Photo: Off, 3 shots/1s, 7 shots/2s, 15 shots/4s, 30 shots/8s
Default setting is Off.
Burst captures up to 30 photos in 8 seconds, so it is perfect for capturing fast-
moving activities.
7. Delay Timer: Off/Delay 3s/Delay 5s/Delay 10s/Delay 20s
Default setting is Off.
A delay timer gives a delay between pressing the shutter release and the shutter's
firing. It is most commonly used to let photographers to take a photo of themselves
(often with family).
13